top of page
DL 66D.png

MEDICAL LAMP AmtolIyathanto DL-66D

The DL-66D can meet high light power needs with 2 LED heads with 160,000lux power.
The light diameter of these products, which have 68 LEDs in each head, can be adjusted between 12-30 cm.
Light diameter adjustment can be made conveniently for wide or narrow surgical areas.
The light diameter is adjusted via the LCD panel or the handle on the lamp head.
With one touch on the control panel, the lamp can be increased to maximum light power.
With the Endoscopy mode on the control panel, the handpiece can switch to or exit the endoscopy mode with one touch.
The head does not close completely in endoscopy mode, providing a low level of ambient illumination.
Heads with low aerodynamic resistance in lamps maintain laminar flow.

DL 6D.png

MEDICAL LAMP AmtolIyathanto DL-6D

DL-6D is a single-headed operating room ceiling lamp with 68 led bulbs and a light power of 160.000lux.
All functions can be accessed with the touch LCD screen located on the edge of the lamp head.
The lamp light level can be adjusted between 1-100 on the control panel and helps the user to set the desired light level exactly.
The light diameter of the head can be easily adjusted for wide or narrow surgical areas between 12-30 cm.
It is an ideal product for users who need high light power in narrow surgical areas.
Thanks to the handpiece, the feature of adjusting the light diameter without disturbing the sterilization helps the user, and the sensors in the lamp heads allow the relevant slice to turn off when the surgeon's head is detected, so that there is no increase in the light on the operation area and the surgeon's head.
User-specific solutions can be offered for low ceilings.

DL 62D.png

MEDICAL LAMP AmtolIyathanto DL-62D

Consisting of 1 main and 1 satellite head, DL-62D's main head is 65 cm and a satellite head is 44 cm in diameter and provides ease of use for narrow spaces.
The color temperature of the lamps can be selected in 7 different settings between 3.500K – 5.000K.
These settings allow users to see the texture in its true color.
The lamp light level can be adjusted between 1-100 on the control panel and helps the user to set the desired light level exactly.
With a single touch of the control panel, you can switch the lamp to or from endoscopy mode.
There are 68 LEDs in the main title and 28 LEDs in the satellite title.
Failure of a bulb during operation does not affect other bulbs and the lamp continues to work.
Only the damaged bulb is replaced on the lamp.

DL 66CM.png

MEDICAL LAMP AmtolIyathanto DL-66CM

The DL-66CM has 2 heads with 160,000lux light power. In order to meet the needs of the camera and monitor, SONY HD analog, 1/2.8 type CMOS sensor, camera with 30x optical zoom and autofocus feature and 24”, Active Matrix TFT LCD, medical monitor with 1920 x 1200 resolution have been added to the lamp.
During the operation, the camera located in the center of the lamp transfers the image to the monitor and allows other people to watch the operation.
All functions can be reached with the touch LCD screen lamp located on the edge of the lamp head.
The camera attached to the lamp head is commanded via the control panel.
The light diameter can be adjusted between 12-30cm.
Light diameter adjustment can be made conveniently for wide or narrow surgical areas.
With the Endoscopy mode on the control panel, the handpiece can switch to or exit the endoscopy mode with one touch.
The head does not close completely in endoscopy mode, providing a low level of ambient illumination.
The life of the led bulbs used in the lamp heads is 60,000 hours.

DL 62CM.png

MEDICAL LAMP AmtolIyathanto DL-62CM

DL-62CM operating room ceiling lamp has SONY HD analog, 1/2.8 type CMOS sensor, camera with 30x optical zoom and autofocus feature and 24”, Active Matrix TFT LCD, medical monitor with 1920 x 1200 resolution.
During the operation, the camera located in the center of the lamp transfers the image to the monitor and allows other people to watch the operation.
The camera attached to the lamp head is commanded via the control panel.
The monitor, which is mounted on the lamp arm, has the ability to move and position.
LED technology does not cause temperature increase in both the surgical area and the surgeon's head.
The LED bulbs used in these heads, which can produce 160,000lux and 120,000lux power, have a lifespan of 60,000 hours.
There are 68 LEDs in the main title and 28 LEDs in the satellite title.

DL 2D.png

MEDICAL LAMP AmtolIyathanto DL-2D

DL-2D is a single-headed operating room ceiling lamp with 28 LED bulbs and 120.000lux light power.
All functions can be accessed with the touch LCD screen located on the edge of the lamp head.
The lamp light level can be adjusted between 1-100 on the control panel and helps the user to set the desired light level exactly.
Thanks to the handpiece, the feature of adjusting the light diameter without disturbing the sterilization helps the user.
When the sensors in the lamp heads detect the surgeon's head, it ensures that the relevant slice goes out, so that there is no increase in the light on the operation area and the surgeon's head.
User-specific solutions can be offered for low ceilings.

bottom of page